Babyreefers' Tips & Tricks
Here are my experiences, tips and tricks of enjoying this lovely hobby. I hope you will find them helpful.
How NOT to do a water change
Leaving everything on while doing a water change
Why? As you withdraw/empty the water level where your return pump is will drop > return pump will make a loud noise and start blowing bubbles into your display tank.
Leaving skimmer on while turning off the return pump.
Why? Water will back flow into the sump > water level will rise > skimmer cup will overflow > you will end up doing a much bigger water change what you had originally planned.
Leaving your hose unattended while filling the tank
Why? NEVER leave your hoses unattended! You may think it will stay in place but it will jump out of the tank and start spilling water all over the floor! When the hose jumps out, it is already too late. You will be cleaning up your puddle for an hour. lol
How to do a water change
How to Frag
coming soon...
Leaving everything on while doing a water change
Why? As you withdraw/empty the water level where your return pump is will drop > return pump will make a loud noise and start blowing bubbles into your display tank.
Leaving skimmer on while turning off the return pump.
Why? Water will back flow into the sump > water level will rise > skimmer cup will overflow > you will end up doing a much bigger water change what you had originally planned.
Leaving your hose unattended while filling the tank
Why? NEVER leave your hoses unattended! You may think it will stay in place but it will jump out of the tank and start spilling water all over the floor! When the hose jumps out, it is already too late. You will be cleaning up your puddle for an hour. lol
How to do a water change
- Prepare RODI water
- Add Salt mix well
- Add heater to match the tank temperature
- While I wait, I like to clean the glass.
- Turn off everything! ATO, Return pump, wave maker, and especially SKIMMER!!!!!!!!!!!!
- Drain equal amount of water to what you have prepared
- Add newly mixed salt water to the tank. Using a pump will make life a whole lot easier. TIP! But remember when you turn the pump off and if the tube is still in the tank, water will backflow. Damn gravity~!
- Turn on equipment in this order
- Return pump and wait for the usual water circulation to occur (water going over the overflow and coming back up)
- Only when the water level is stable and at usual level, turn on everything else.
How to Frag
coming soon...