Recommended Method For Adding Sump Baffle Without Removing Sump
Hello Everyone,
I am considering adding an extra baffle in my sump to experiment with a particular idea. The current chamber I am thinking of splitting is roughly 60W x 30D x 35H cm. Want to split it roughly in half.
Don't particularly want to completely remove the sump from the system. Ideally would like to shut down the overflow, drain most of the water from the sump, but leave it in place under the tank. Then silicone in a partition, wait until it cures, then restart the system.
Is this possible? Any fish safe silicone that can be applied when the area is wet or even slightly underwater?
Thanks for any wisdom shared. J
I am considering adding an extra baffle in my sump to experiment with a particular idea. The current chamber I am thinking of splitting is roughly 60W x 30D x 35H cm. Want to split it roughly in half.
Don't particularly want to completely remove the sump from the system. Ideally would like to shut down the overflow, drain most of the water from the sump, but leave it in place under the tank. Then silicone in a partition, wait until it cures, then restart the system.
Is this possible? Any fish safe silicone that can be applied when the area is wet or even slightly underwater?
Thanks for any wisdom shared. J